$11.34

Sima Handle - Black - Esor

SKU
70694
$11.34
In stock
Availability : Stock item - normally packed and shipped within 1 working day + see delivery options

Delivery methods

Envelope
USPS:
5-8 working days
Plane
DHL Express:
2-4 working days
Truck
DHL:
5-8 working days
Handtaget Sima är ett långt handtag med mjukt böjda ändar. Trots sin längd på 204 mm känns den elegant och nätt. Den tillför en prydlig och modern känsla till kök och badrumsmöbler.

Sima är gjuten i Zamak. Zamak, eller zink-alloy, är en metallegering där zink blandas med bland annat aluminium och koppar. Legeringen är perfekt för gjutningar samtidigt som den är slitstark och tacksam att belägga med olika ytskikt. Av just den anledningen är Zamak den mest använda metallen i just beslag som handtag och knoppar.

Efter gjutning putsas och poleras ytan helt slät. När ytan är tillräckligt fin, lackeras den i svart. Slutligen får handtaget ytterligare ett skikt av skyddande lack.

Sima handtag är tillverkade av spanska Esor. Rötterna och hantverket i denna baskiska tillverkare går tillbaka till 1960-talet. Beaktansvärt har Esor behållit tillverkning lokalt i Baskien. Resultatet är en stor serie av beslag med hantverkskänsla och oerhörd hög kvalitet.

Vi rekommenderar att montera handtaget på lite större skåpsdörrar och lådor. Handtagets längd gör att du får ett stadigt grepp som gör den speciellt lämplig för integrerade vitvaror. Behöver du en matchande knopp? Då kan knoppen Urua vara ett alternativ. Urua har likadant ytskikt som Sima och passar till mindre lådor och skåpsdörrar.
Product Information
Material:
Zink-Alloy anchor_icon
Colour:
Finish:
Lacquered anchor_icon
Made in:
Spain anchor_icon
Brand:
Coating:
Measurements
anchor_icon
CC-size Depth (A) Height (B) Width (C)
192 mm 25 mm 15 mm 203 mm

Esor

Brand


 

Esor takes pride in crafting its entire product line in Spain, from the initial moulding to the finishing touches of the coating. This dedication to European-based manufacturing sets Esor apart in today's furniture hardware industry.

Merging the aesthetics of traditional handles with modern coatings, Esor strikes a harmonious balance between the old and the new.

Mounting Handles

Mounting Instructions


 
Mounting handles and knobs is easy and doesn't require any advanced tools or special skills. Just follow the simple steps below
  1
Prepare and drill the hole
Mark the hole on the cabinet door with a thin pencil. Drill with 4,5 or 5 mm drill from the front side of the cabinet. Any splitter from the exit hole will appear on the back side of the cabinet and not be visible on the front
  2
Mount the handles
Mount the handle with the included M4 screws. Do not use a power drill when attaching the handle. Instead, use a standard manual screw driver and screw the M4 screws as tight as you feel possible. To high torque can damage the knobs or the screw
  3
Inspiration
Tips, if you have many knobs to mount with same position on each cabinet, then it can be worth to make a simple template of a board and some simple wood.
BESTSELLERS
Allabeslag Sverige AB © 2025